为了能够为ALMEMO®测量技术可以获取的所有测量量提供接近完整的校准范围，ALMEMO设有校准实验室。关于测得的空气温度，空气湿度，风速和电气尺寸，我们根据标准DIN EN ISO / IEC 17025：2018获得认可。
Welcome at AHLBORN !
Discover the world of AHLBORN measuring instruments, data logger and sensors !
Data logger ALMEMO®
ALMEMO® means one data logger for all measurement - only the sensor needs to be changed. As soon as a sensor is connected, each ALMEMO® measuring instrument or data logger automatically indicates the measuring range and the measured value. When the sensor is changed, no setting is required on the instrument. Any sensor subsequently connected is recognized automatically and the measured value is indicated immediately on the display. Sensors can be changed as and when necessary - even in the course of a measuring operation. It is also possible to store calibration values in the memory chip in the ALMEMO® connector. Subsequent measuring operations can thus be performed with the highest accuracy.
The ALMEMO® D7 technology allows the DIGITIZATION OF SENSOR SIGNALS. The advantage: If required, digital sensors can be exchanged without loosing the calibration data since the calibration of a digital sensor takes place without a measuring device. Individual sensor parameters are also stored in the connector. Also freely selectable comments can be deposited. In the displays of the devices extended ranges are possible. With 10 measured quantities per D7 connector, simple data loggers become multifunction measuring instruments, even with sensors from other manufacturers. Take advantage and digitize your sensors!
Measuring instruments must be able to interconect with their environment. WinControl is the software for monitoring, evaluation and system integration. For all ALMEMO® measuring instruments and data loggers.
Ahlborn Mess- und Regelungstechnik GmbH
In the region south of Munich, at the foot of the Northern Limestone Alps, a place where other people go on holiday, we develop and manufacture in our family run company high quality measuring technology for research, industry, environmental protection, building renovation and much more. The bigger part of the electronics production takes place in our branch in Ilmenau in Thuringia. The company is equipped with state-of-the-art production technology. All products of AHLBORN Mess- und Regelungstechnik GmbH carry the label "made in Germany.
well educated and motivated
Every employee is well educated and motivated. The basic requirement is a high level of individual responsibility and a pleasant working atmosphere with a social structure. Every employee of AHLBORN Mess- und Regelungstechnik GmbH receives a participating share in the company's profits.
evolution of measuring technology
Since more than 20 years we use intelligent connecting plugs for sensors. This means that one single measurement instrument is able to operate completely different applications – just the sensor needs to be exchanged. By doing so, no extensive programming is necessary. The measurement operation can start right after connecting the respective sensor.
DAkkS - Calibration laboratory D-K-19342-01-00
For being able to offer a close to complete calibration range for all measured quantities that can be acquired by the ALMEMO® measuring technology, we maintain a calibration laboratory. Concerning the measured quantities air temperature, air humidity, wind speed and electrical sizes we are ACCREDITED ACCORDING TO standard DIN EN ISO/IEC 17025:2018.