免费上传展示库存 免费发布供应信息 免费发布采购需求
PETER HIRT

PETER HIRT

Peter Hirt LBB组件

高精度线性滚珠轴承单独匹配。直线球轴承的组成部分由轴,球保持器和轴承座组成,适用于每个直线球轴承,分别研磨并磨成一组。这样可确保没有粘滑效果和最长的使用寿命值。

-------------------------
Peter Hirt量具

Peter Hirt传感器,信号调节模块,孔径测量传感器和小信号开关是为高精度测量和控制应用而单独制造和校准的。

Peter Hirt换能器

Peter Hirt的换能器,用于高精度测量应用。传感器系列可根据测量和安装要求提供不同的测量行程,分别为±1 mm,±2 mm和±5 mm,并有四种型号F(弹簧进给),V(带真空缩回)P(带气动推)和L(带气隙密封的气动推)。可提供用于标准或可插拔传感器的轴向或径向电缆出口。

Peter Hirt模组

Peter Hirt的信号调理模块专门针对带有TESA®兼容半桥电路的T系列传感器进行了校准。模块的电源电压为5、12或24 VDC,双极性输出信号为±5 VDC或±10 VDC,单极性输出信号为0-5 VDC或0-10 VDC,或者电流环路接口为4-20mA。根据组装要求,这些模块可以作为用于前面板安装的T模块,包括在保护盒中的电缆模块在内。电源/信号电缆或作为DIN导轨安装的DIN导轨模块。

Peter Hirt钻孔MT

微型传感器设计用于非常狭窄的空间,可进行高精度测量,可重复性为0.050微米,线性误差最大。测量范围的1%。

Peter Hirt小信号开关

Peter Hirt小信号开关MICRON开关,具有±0.0005 mm的极高可重复性,用作滑架和横向滑动,机械限位,定位等的参考开关。

配件

适用于Peter Hirt传感器T系列标准件且可插拔的附件。连接和扩展电缆,换能器尖端,尖端支架,固定元件和气缸。

---------------------------
Peter Hirt螺纹规

Peter Hirt螺纹规塞规的尺寸从最小的0-200(球直径0.200 mm)到最大的12(球直径4.000 mm)不等。当前最小尺寸的螺纹规塞尺0-200,红宝石球直径为0.200 mm,其尺寸适合于测量M1.7尺寸的螺纹。螺纹规感应器可以单独购买,也可以在12支,13支或14支的保护性木盒中购买。

Peter Hirt螺纹规感应器

螺纹规塞尺配有两个等级为6的红宝石球。球的最大尺寸偏差为±1微米。

Peter Hirt TG感应套

TG Feeler放在木盒子里。螺纹规塞尺,配备两个90度或平行的6级红宝石球。球的最大尺寸偏差为±1微米。


LBB Components

High precision Linear Ball Bearings individually matched. The components of the Linear Ball Bearings composed of shaft, ball cage and housing are for each Linear Ball Bearing individually lapped and honed together in matched sets. This ensures no stick-slip effect and highest lifetime values.

-------------------------
Measuring Gear

Peter Hirt transducer, signal conditioning module, bore measuring transducer and small signal switch individually manufactured and calibrated for high-precision measurement and control applications.

Transducers

Transducers by Peter Hirt for high precision measurement applications. The transducer series are available in accordance with the measurement and installation requirements with different measuring strokes of ± 1 mm, ± 2 mm and ± 5 mm and in the four variants F (spring feed), V (with vacuum retract) P (with pneumatic push) and L (pneumatic push with air gap seal). Available with axial or radial cable exit for standard or pluggable transducer.

Modules

Signal conditioning modules by Peter Hirt are specially calibrated for the T-series transducers with TESA® compatible halfbridge circuit. Modules are available with supply voltages of 5, 12 or 24 VDC with bipolar output signal ±5 VDC or ±10 VDC or unipolar output signal of 0-5 VDC or 0-10 VDC or with current loop interface 4-20mA. Depending on assembly requirements, the modules are available as T-Module for front panel mounting, Cable-Module in a protective box incl. supply / signal cable or as DIN-Rail Module for DIN-Rail mounting.

Bore MT

Miniature Transducer designed to fit into very tight spaces for high precision measurement with a repeatability of 0.050 microns and a linearity error of max. 1% of the measuring range.

Small signal switch

Peter Hirt small signal switch MICRON Switch with extremely high repeatability of ± 0.0005 mm for applications as reference switch for carriage and cross-slide, mechanical stop, positioning ect.

Accessories

Accessories suitable for Peter Hirt Transducer T Series standard and pluggable. Connection and extension cables, transducer tips, tip holders, fixing elements and pneumatic cylinders.

---------------------------
Thread Gauge

Peter Hirt Thread Gauge Feelers are available from the smallest size 0-200 (ball diameter 0.200 mm) up to size 12 (ball diameter 4.000 mm). The current smallest size Thread Gauge Feeler 0-200 with a ruby ball diameter of 0.200 mm, is sized for the measurement of threads to size M1.7. The Thread Gauge Feelers are available individually or in a protectiv wooden box as a 12pc, 13pc or 14pc set.

Thread Gauge Feelers

Thread Gauge Feelers are equipped with two ruby balls Grade 6. The maximal dimensional deviation of the balls is ± 1 micron.

TG Feeler Set

TG Feeler Set in wooden box. Thread Gauge Feelers equipped with two ruby balls Grade 6 in orientation 90 ° or parallel. The maximum dimensional deviation of the balls is ± 1 micron.

显示全部Datasheet?产品规格书pdf?官网:https://www.peterhirt.ch/

PETER HIRT 供应商 免费推广 您也可以在此展示,免费!
PETER HIRT 供应商 免费推广 您也可以在此展示,免费!
PETER HIRT 供应商 免费推广 您也可以在此展示,免费!

您是“PETER HIRT”的供应商吗?

免费 [上传展示库存]和 [发布供应信息],

发布 [PETER HIRT 供应商推广],一天1元,百度 360,搜搜一下看到您!

免费注册

供应广告展示范例

您在寻找“PETER HIRT”的产品吗?

免费 [发布采购需求],

采购易让全球“PETER HIRT”供应商主动直接联系您

免费注册

采购需求展示范例

温馨提示:


** 同一公司不同人员可同时注册

** 采购易只专注平台服务,不介入交易环节,不赚差价,一切尽在您掌握

 
PETER HIRT 供应商 免费推广 您也可以在此展示,免费!
PETER HIRT 供应商 免费推广 您也可以在此展示,免费!